Top Quality Air Compressor Start Capacitor - YD-9CK Low Voltage Reactive Power Compensation Controller – Yide

Short Description:

YD-9CK series low-voltage reactive power compensation controller (hereinafter referred to as controller), a new generation with elegant appearance, adopts a special power parameter acquisition chip and MCU processor, meeting the criteria of national technical standards, regulations and actual requirements of users. It’s convenient to install and operate the product. The human-machine interface is achieved through the digital display and key press. The controller is connected to intelligent in...


Product Detail

Product Tags

Related Video

Feedback (2)

We take "customer-friendly, quality-oriented, integrative, innovative" as objectives. "Truth and honesty" is our administration ideal for Aluminum Electrolytic Capacitor 650v , Transformer Reactive Compensation Capacitor , Parallel High Voltage Capacitor , All the time, we have been paying attention on all details to insure each product satisfied by our customers.
Top Quality Air Compressor Start Capacitor - YD-9CK Low Voltage Reactive Power Compensation Controller – Yide Detail:

YD-9CK series low-voltage reactive power compensation controller (hereinafter referred to as controller), a new generation with elegant appearance, adopts a special power parameter acquisition chip and MCU processor, meeting the criteria of national technical standards, regulations and actual requirements of users. It’s convenient to install and operate the product. The human-machine interface is achieved through the digital display and key press. The controller is connected to intelligent integrated power capacitor via 485 communication.

Physical quantities include voltage, current and power factors. The AC sampling technique is especially suitable for occasions with large power factor changes with the advantage of few movement and high control accuracy.

Power supply condition

*working voltage:AC 220V(split compensation) or AC 380V(conjunct compensation)

*voltage deviation: ±20%

*sampling current: =<5A

*power consumption: <5W

*rated frequency: 50Hz±5%

*input resistance: =<0.2Ohm

Measuring accuracy

*voltage:≤ ±1.0% (in the range of 80%~120% nominal voltage)

*current:≤ ±1.0% (in the range of 10%~100% nominal current)

*power factor: ≤±1.5%

*reactive power: ≤±2%

*temperature: ≤1℃

*sensitivity: ≤200mA

Working environment
* ambient temperature: -20ºC-60ºC
* relative humidity: ≤90%(20ºC)
* atmospheric pressure: 79.5-106.5kpa
* applicable altitude: ≤2000m
* IP grade: IP30,panel IP40
* installation environment: indoor

* No flammable medium, conductive dust and corrosive gas.

Output mode

*RS485 communication controls output and company’s intelligent capacitors

*Number of networking units: No. conjunct compensation intelligent capacitor ≤30; No. split-compensation intelligent capacitor ≤10; No. total units(co-compensation plus split-compensation)≤30 units

Model introduction

yd (1)

Mounting dimension

yd (2)

Display panel and press key

yd (3)

1: three-phase power factor leading or lagging indicator lamp (red: leading;green: lagging.)

2: electrical parameters

3: split compensation capacitors’ status(green: networking capacitors;flickering green: in the discharge delay;red: switching capacitor,lights become the conjunct compensation status indicator lights.)

4: over-limit protection indicator light (after voltage,current or harmonic surpass the limit,red light lights up.)

5: communication status (mock switching mode: red indicator light flashing;normal switching mode: green indicator light flashing.)

6: manual mode or auto mode pointing (manual mode: red light lighting continuous;auto mode: green light lighting continuous.)

7: conjunct compensation status indicator light (green: networking capacitors;flickering green: in the discharge delay;red: switching capacitor.)

8: manual and auto mode switch button

9: enter key

10: execute key

Function and Feature

1. Data obtained such as voltage, current, power factor through AC sampling.

2. Dynamic display of various parameters of power distribution and the parameter setting is simple and quick. All parameters already set never lost even if the power is cut off.

3. Automatically detect the quantity and capacity of intelligent capacitors, and control the switching according to parameters of reactive power power grid.

4. It has the protection of over-voltage, under-voltage, voltage alarm, undercurrent, over temperature, voltage harmonic and current harmonic. When the parameters of the power grid exceed limit setting, the controller quickly cuts off the capacitors that have been put into operation and locks the output, to protect capacitors and prolongs their service life.

5. With comprehensive calculation of voltage, current, power factor, and reactive power, and with the judgment of voltage fluctuation, the compensation more accurate without switching oscillation.

6. The above criterion values are sampled at multiple points in the action delay time to analyze the reactive power trend, thus avoiding the judgment error caused by the single point sampling of action points of the conventional controller. When the power factor changes greatly, the reactive power and compensation direction (switching on or off) can be accurately determined.

7. It has the function of manual / automatic switching. When the capacitor is set automatically, the input or removal of capacitors is controlled according to the comprehensive factors of voltage, load, power factor and reactive power shortage. When the capacitor is set manually, its input or removal can be manually operated, which is convenient for factory debugging and quick capacitor switching. Analog switching can be achieved in both manual and automatic states.

8. Principle of switching: The cycle switching mode method can prolong the service life of capacitors.

Thank you very much for browsing our products. Our excellent products and services will satisfy you.

If you have any questions,please contact us.
Company Name:ZHEJIANG YIDE TECHNOLOGY CO., LTD.
E-mail: yidek@126.com 
Telephone: 86-577-57105861
Website: https://www.yidek.com/en
Address: No. 51 Wenxiu Road, Pu Zhou Street, Longwan District, Wenzhou, Zhejiang, China


Product detail pictures:

Top Quality Air Compressor Start Capacitor -
 YD-9CK Low Voltage Reactive Power Compensation Controller – Yide detail pictures

Top Quality Air Compressor Start Capacitor -
 YD-9CK Low Voltage Reactive Power Compensation Controller – Yide detail pictures

Top Quality Air Compressor Start Capacitor -
 YD-9CK Low Voltage Reactive Power Compensation Controller – Yide detail pictures

Top Quality Air Compressor Start Capacitor -
 YD-9CK Low Voltage Reactive Power Compensation Controller – Yide detail pictures


Related Product Guide:
The Next Phase of Development for Distribution Systems, Part I | Epoxy Resin Filled Capacitor
Aseptic Packaging for the Pharmaceutical Industry Outlook 2019 to 2024 – Updated Research Published By Globalmarketers | Fan Motor Capacitor

The purchaser fulfillment is our primary focus on. We uphold a consistent level of professionalism, high quality, credibility and service for Top Quality Air Compressor Start Capacitor - YD-9CK Low Voltage Reactive Power Compensation Controller – Yide , The product will supply to all over the world, such as: Saudi Arabia , Cambodia , Puerto Rico , By adhering to the principle of "human oriented, winning by quality", our company sincerely welcomes merchants from at home and abroad to visit us, talk business with us and jointly create a brilliant future.
  • This is a very professional and honest Chinese supplier, from now on we fell in love with the Chinese manufacturing.
    5 Stars By Alexandra from Nicaragua - 2018.09.19 18:37
    The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!
    5 Stars By Steven from Qatar - 2017.05.02 11:33
    Write your message here and send it to us